Boiler Installation Tips to Get the Best from Your Rental HVAC Systems

After choosing your boiler units for heating purposes, the next important thing to opt for is a professional expertise in boiler installation. HVAC contractors Toronto offer extensive installation and restoration services for multiple models depending on their age, manufacturer and even the duct lines. In order to get the best out of your boilers and furnace rentals, follow these tips during installation.

furnace rental

Calculate the correct load value

Rental furnace and boilers can deliver a variable output depending on your daily requirements. If you have more members in the family and share a rather larger space, your boiler installation must be done after elaborate load calculation and correction.

Best HVAC contractors in Toronto offer comprehensive software-enabled load calculation services for accurate delivery measurement, across different seasons, water input and temperature variance throughout day and night.

Always pick a simple platform

Based on the size of the boiler, the installation platform can be laid accordingly using the manual guidebook. A 2×8-inch stud lumber and 0.5 inch thick wooden platform with isolation strips are adequate materials to get the best performance out of the unit after boiler installation is complete.

Fan coil unit placement matters a lot

Choose secluded areas to place your fan unit coil. If it is a high-efficiency gas furnace or a boiler unit, the fan coil units can be smartly stacked in areas like attic, garage or small crawl space over the ceiling. As long as the ductwork remains protected from the moisture and dirt, your boiler installation will deliver the best performance for months to come.

Connect the drain tap for overhead systems

A secondary drain tap is recommended for overhead systems as the boiler installation experts avoid connecting the condensate lines to the closed drain systems. The drain line pitch is maintained at quarter of an inch per foot.

If it’s a rental unit, install a secondary drain pan

Consider installing a secondary drain pan and a float switch along with a return air filter box and duct as per the local codes. The HVAC contractors Toronto rental services provided ample space management tips on use of pre-configured suspension platform for overhead boilers and tankless water heater rental units.

Places to avoid

The return air opening requires to be cut so that the fan coil can pass through the opening for highest performance. The places to avoid for return air opening cuts are dining room, kitchen, bathroom and living room. In fact, you should only get boiler installation done where there is a provision to accommodate 180 degree bends.

During the boiler installation process, the expert professionals check for proper fit for the return air box so that it does not interfere with the placement of other materials in the layout.

furnace rental toronto

The bottom line

While installing the water and air distribution components from the tankless water boiler rental unit, the electrical connections too play an equally important role in ensuring best performance out of the thermostat regulation and automated ambient water temperature management.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s